A WATER-BASED WASHER
FOR DISPOSABLE CUP SYSTEMS
KANDO turns disposable cups into reusable cups. That's good for the environment and the wallet.
- Save Money
- Re-use disposable paint cups multiple times
- Reduce single-use plastic waste
- Identify waste paint volumes
Join the challenge against pollution and unnecessary costs.
MAIN ADVANTAGES
- SAVES MONEY
- KANDO allows the multiple use of disposable cup systems and thus cuts costs.
- AVOID WASTE
- Help to reduce plastic waste. Up to 90% less disposable cups used. Less plastic waste in the environment.
- EASY DISPOSAL
- Ultimate disposal of the cleaned cup after long-term reuse in the normal recyclable waste possible (depending on national and local regulations).
- SHORT PAYBACK PERIOD
- Your investment is profitable in a very short time.
Economical and
ENVIRONMENTALLY FRIENDLY
KANDO is an automatic washer for cleaning of disposable paint cups. The patented cleaning system guarantees an extremely low cleaner consumption thanks to the two-stage cleaning process with automated pre and post-cleaning. Just 5 litres of KANCLEAN cleaning fluid are needed for cleaning about 100 cups and lids. This water-based paint cleaner, specially developed for this application, gives residue-free washing results, even with dried water-based paints.
Additionally, KANDO offers an amazing cost-saving potential combined with excellent cleaning results. The environment also benefits, as disposable plastic waste is reduced by about 90% through the use of Kando.
This is how KANDO WORKS
Environmental protection that
PAYS OFF
The tables below show the annual operating cost in £ with only disposable cups and with KANDO usage in comparison. The calculation is based on a consumption of 15 disposable cups per day, 251 working days per year and £1 per cup cost.
The calculation includes the costs for the B-TEC KANCLEAN cleaning fluid, its disposal, the air consumption and 1-2 replacement cups per day if needed.
You save up to 75% on your cup system costs.
(31.10.19)
= £2824
(31.10.19)
15 x 251 x £1
= £3765
For consistent optimum results always use KANCLEAN cleaning fluid.
Clean in next to NO TIME
KANDO is not only easy to install and operate. It also works extremely fast: in just 10 to 15 minutes, three cups and three lids are clean again. Then just dry them briefly and the cup system is ready for the next job.
Last but not least, KANDO enables a flexible installation location - an extraction is not required (depending on national and local regulations) and KANDO can therefore also be set up outside the mixing room.
ON-SITE DEMONSTRATION?
We come to you!
| KANDO IN DETAIL | IMPORTANT - do not use KANDO in conjunction with any other paint scheme incorporating solvent or other accelerators with the water based paint. |
| Field of use | Cleaning of cup systems with water-based paints |
| Kind of cup systems | Due to flexible lid holder positioning cleaning of all common cup systems is possible |
| Amount of Cleaner per process | 3 cups and 3 lids |
| Cleaning time | About 10-15 minutes IMPORTANT - KANCLEAN should only be used with water based paint schemes |
| Cleaning fluid | B-TEC KANCLEAN water-based paint cleaner |
| Features | Two cleaning compartments, draining station with holder, base with door, Kalrez double diaphragm pumps |
| Material | Cleaning machine completely made of stainless steel, base galvanized |
| Compressed air supply | 6-6.5 bar |
| Items delivered | KANDO incl. 2 x 25l KANCLEAN water based paint cleaner and draining station |
| Dimensions (WxDxH) | 900 x 655 x 1010 mm without draining station 1245 x 655 x 1010 mm with draining station |